ROUND BACK Polished D Shaped Glass Clamps 10mm glass

Round Back Polished D Shaped Glass Clamps for round balustrade posts.

This ‘D’ Clamp is the perfect solution for functional and aesthetic glass balustrades setups, also suitable for partitions, railings, windbreaks, displays and sneeze guards.

• Glass Compatibility: Suitable for 10mm Glass
• Material: 316 grade Stainless Steel (Suitable for both indoor and outdoor applications)
• Finish(s): Satin or Polished Finish
• Suitable for square baluster or 42.4mm /  Ø48.3 tube baluster

The required screws(s) will vary depending on the surface material you’re fixing to (e.g. stainless steel, wall, floor…). The above Hexagon Socket Head Cap Screw (M8) is the standard screw to be used when fixing these glass clamps to steel posts. You might want to choose the correct fixing screw with similar dimension as this.

Below is a typical application within a glass balustrade system, to show the recommended positions for fixing the glass clamps.

Dimensions (mm)		Min.	Max.
W	Width of Glass	500	1500*
H	Height of Glass	800	1000*
h1	Distance between handrail and top of the glass	10	50 without edge protection, 100 with edge protection
h2	Distance between floor and bottom of the glass	10	50 without edge protection, 100 with edge protection
h3	Glass edge above – axle upper glass clamp	100	150
h4	Glass edge below – axle lower glass clamp	100	150

*Max. size depends on glass type, glass thickness and wind factor.
** For safety reason, we suggest the Secure Pin (supplied with your clamps) to be used when the glass panel is fixed to the outside of a staircase and overhanging.

Please note: All specifications are for reference purposes only and are subject to change without prior notice.