Bespoke Mirrors

*Please note that our bespoke mirrors are not made with toughened glass, and are therefore not safe for use behind a heat source.

Start building today!

  • Polished edges are included as standard.
Silver
Grey
Bronze
Antique Bronze
Antique Silver
Antique Grey
Rectangle
Cut Off Corner Rectangle (Left)
Cut Off Corner Rectangle (Right)
Quadrant
Circle
Ellipse
Semicircle
Semiellipse
Parallelogram
Reverse "T" Shape
Right Hand "L" Shape
Left Hand "L" Shape
Right Hand Rake
Left Hand Rake
Double Rake "Irregular"
Triangle

Shape Diagrams

Shape Dimensions

Please note to allow a 2mm tolerance in all designs. All internal notches will have a 7mm radius to ensure structural integrity during the toughening process.

  • Max: 3000

  • Max: 3000

  • Max: 3000

  • Max: 3000

  • Max: 3000

Mirror Options

Glass Extras

  • If you order hinges from The Glass Warehouse we will provide the correct hinge cut outs. Alternatively, upload your hinge design and technical drawings. If there are any problems one of our customer service representative will contact you regarding your exact requirements if needed.

  • Min: 1

  • Any polished notches/socket cut outs will have an internal radius of at least 14mm. Non polished notches/socket cut outs will be approximately 7mm internal radius. A customer service representative will contact you regarding your exact requirements if needed. Please upload any if possible.

  • Min: 1

  • Any drilled holes must be the same size or greater than the thickness of your glass selected. (For example 10mm glass can only have a hole of 10mm in diameter or greater). Drilled holes must be within reasonable distance from edge of the glass or other holes / cut-outs to prevent breaking when toughened. A customer service representative will contact you regarding your exact requirements if needed.

  • Min: 1

  • Drill holes may be needed if you are considering fixing glass to a wall or to another object. This may be the case if purchasing glass for a kitchen splashback, table top or shelve. The minimum drill hole size must be equal to or greater than the thickness of the glass. The holes must be placed at least five times the thickness of the glass from the edge to centre of hole.Min: 6Max: 65

  • A rounded corner with a polished finish. A customer service representative will contact you regarding your exact requirements if needed.

  • Min: 1

  • Tell us the radius size you require. This can range from 2mm to 100mm. This is dependent on the size of your glass. One of our customer service representatives will contact you regarding any issues.Min: 2Max: 100

  • The immediate sharpness of the corner(s) removed with grey finish. A customer service representative will contact you regarding your exact requirements if needed.

  • Min: 1

  • Polymer coating protects glass with a barrier that repels water, soil, stains, soap scum, rust and hard water mineral deposits.

  • Please share all diagrams, drawings and specifications (maximum of 10 files allowed)Max file size: 12 MBPermitted file types: jpg jpeg jpe png gif

Quantity

Product Description

If you’re looking for somewhere to buy custom size mirrors, look no further. Our made to measure mirrors are available in 6mm thickness. Therefore can be cut, shaped, polished and drilled to your bespoke designs.

Here at The Glass Warehouse we offer a vast product range. Perfectly made to enhance your home or work space.

Product Additional information

*Please note that our bespoke mirrors are not made with toughened glass, and are therefore not safe for use behind a heat source.

Glass Type

Mirror

Colour

Silver, Grey, Bronze, Antique Bronze, Antique Silver, Antique Grey

Glass Thickness

6 mm

Shapes

Rectangle, Cut Off Corner Rectangle (Left), Cut Off Corner Rectangle (Right), Quadrant, Circle, Ellipse, Semicircle, Semiellipse, Parallelogram, Reverse "T" Shape, Right Hand "L" Shape, Left Hand "L" Shape, Right Hand Rake, Left Hand Rake, Double Rake "Irregular", Triangle

Room Type

Bathroom, Bedroom, Commercial Office, Dining Room, Dressing Room, Gym, Hallway, Home Office, Kitchen, Living Room, Utility Room

People Also Bought

  • Frameless Pond Wavy Mirror

    Frameless Pond Wavy Mirror

    From £105.00 inc. VAT
    View
  • Xtragrip High Strength Mirror Adhesive - 290ml Tube

    Xtragrip High Strength Mirror Adhesive – 290ml Tube

    £12.00 inc. VAT
    Add to basket
  • Mirror or Glass Wall Art Mounting Kit

    Mirror or Glass Wall Art Mounting Kit

    £10.79 inc. VAT
    Add to basket
  • Silver Gym, Dance Studio Mirror

    Silver Gym, Dance Studio Mirror

    From £82.99 inc. VAT
    View

Your Basket

Mirrors Cut To Size

If you’re looking for a bespoke mirror, you needn’t look any further than The Glass Warehouse. We have a complete range of made to order mirrors cut to size; so don’t hesitate to find something suitable today!

Our bespoke mirrors are standard 6mm thickness. No matter what you’re looking for, our team of experts are more than capable of helping you to make the improvements to your home or business, hassle-free.

Leading Suppliers of Bespoke Mirrors

The made to measure mirrors cut to size are suitable for sensitive environments and incorporate a safety back to prevent any breakages. As well as this, the bespoke mirrors are designed to fit seamlessly within any room – offering a luxury look and feel.

Our custom mirrors are available in a wide range of formats including the following, wall cladding, splashbacks, cabinets and cupboards. In addition to this, you can even choose a colour that fits perfectly with any colour schemes that you may already have within your property. As with any of the products we supply, the custom size mirror glass is made to last and to provide you with the best value for money.

Should I use foil backing for bathroom mirrors?

It is typically recommended that foil backing is applied to all mirrors in order to protect the silvering from deterioration. However, when it comes to fitting a bathroom mirror this becomes even more important. In damp environments where moisture can build-up, water and salt can have a direct impact on the quality of the mirror. By simply applying a foil backing you can protect the glass from being affected as easily, making your investment go much further.

Will clear backing stop mirrors from breaking?

Mirrors with safety backing applied are typically much sturdier in the face of impact. Made from polypropylene, the backing is applied on the underside of the mirror paint and serves as a barrier that can withstand the biggest amount of pressure were impact to occur. As standard, backing is in place not only to prevent a mirror face from breaking, but also to reduce the risk of injury through shards of glass forming. However, it is important to bear in mind that whilst clear backing can have a huge impact in saving your mirror from breaking, it cannot guarantee it. Applying clear backing will undoubtedly strengthen the surface of the mirror, but if impact is strong enough, your mirror could still become damaged or break entirely.

What are the different types of bespoke mirrors?

When it comes to creating high-quality, affordable bespoke mirrors – The Glass Warehouse have everything you need and more! Thanks to our state-of-the-art-technology and team of in-house specialists, we’re able to manufacture a wide variety of bespoke frameless mirrors to suit all tastes and styles. Amongst some of our most popular are:

Coloured mirrors – Looking to create a truly unique focal point? Our range of coloured mirror glass is a huge hit for those looking for something a little different. We offer custom-made frameless glass mirrors available in bronze, antique bronze silver and grey. All of which make the perfect modern feature for any home or commercial space.

Simply contact our team to find out more!

How do I create a mirrored wall?

If you’re looking to reap all the benefits mirrored glass has to offer, then wall cladding may be just the thing for you. Ideal for enlarging the look of a space, inviting in additional light and creating an interesting focal point to a room – mirrored walls are fast becoming an interior trend.

Here at The Glass Warehouse, not only do we supply a range of bespoke mirrored glass perfect for wall cladding, but we can also supply mirrored glass ideal for furniture cladding. So, if a full wall or room isn’t right for you, items such as tables, drawers and other everyday furniture can now be given the special treatment too!

But – where do you begin creating a mirrored wall? The first thing to decide is the area you wish to embellish, and the type of style you’re going for. From low iron to toughened glass and coloured mirrors, there are many designs you can choose from so take your time with this bit.

The good news is that fitting wall cladding is much like applying tiles, without the need for grouting! The most important thing is to ensure the surface you’re working on has been thoroughly cleaned, with all dirt and dust being removed to prevent complications with adhesives. You may opt to lay your mirrored wall cladding in straight lines, or could choose to go for a specific layout or pattern, the choice is yours and will vary depending on the vibe you’re going for.

Remember, our team of experts are on hand to help guide you throughout the entire process – so whatever your query, don’t hesitate to give us a call.

Certificates & Partners

What Our Customers Say

S Hampshire, United Kingdom

Very competitive prices, best I could find. Delivery was very fast for bespoke sized glass. One of my glass panels was chipped, I contacted one of the team and it was re-made and delivered within 1.5 days. Great service and coms. Thanks.

Rated 5 out of 5
G Howell, United Kingdom

Fantastic company. I’ve been using these guys for around 3/4 years, not only do they complete our orders in very short notice, they delivery and exceed our expectations…9/10

Keep up the good work!!!

Rated 4 out of 5
C Lock, United Kingdom

Excellent level of customer service, from offering advice to assist in choosing the most suitable glass to prompt helpful delivery.

Rated 5 out of 5
M Purewal, United Kingdom

I’ve just replaced my wooden staircase balustrades with toughened glass. I used Express Toughening to supply the 10mm thick glass panels. The company is very professional and helpful. The project went well.

Rated 5 out of 5
G Millett, United Kingdom

Fast quotations, fast processing and on time deliveries. Without doubt this supplier is at the top of their game.

Rated 5 out of 5
S Saleem, United Kingdom

Fast turnaround on orders. Mostly deliver, but can collect for trade customers. Every kind of glass you can imagine cut to mm accuracy by laser.

Rated 5 out of 5